crawl.ee

RC Tehniline vestlus => Skaala projektid => Topic started by: villu18 on October 21, 2018, 12:43:45 PM

Title: 3D print 1/10 Jeep Willys
Post by: villu18 on October 21, 2018, 12:43:45 PM

Sai valese kohta, Dan viska scala projektide alla palun.


Proovin Jeep Willys kere juppid printida, joonised ja failid netist.
https://www.thingiverse.com/thing:2056923 (https://www.thingiverse.com/thing:2056923)

Siin veel sama masina info ja ehitusest täpsemalt infi.
https://www.instructables.com/id/3D-Printed-MB-Jeep-and-M416-Trailer-in-110-Scale/ (https://www.instructables.com/id/3D-Printed-MB-Jeep-and-M416-Trailer-in-110-Scale/)

Sillad peaksid sobima losi MRC või mingi sarnase 1/18 scala crawleri omad.

Väga hästi joonistatud ja kobedat tükkid tulevad, kokku käib M2 poltide ja mutritega.

(https://cdn.instructables.com/FEX/E79Y/IYAMZGYA/FEXE79YIYAMZGYA.LARGE.jpg)
(https://cdn.instructables.com/FFJ/BUUZ/IY4QQ3AJ/FFJBUUZIY4QQ3AJ.LARGE.jpg)

Esimesed juppid:

(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44460895_1112180862279125_1383478372713103360_o.jpg?_nc_cat=107&_nc_ht=scontent-arn2-1.xx&oh=44f5ce2160aada351d7e9e8bde5c18e6&oe=5C3DBF8E)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44500747_1112180992279112_4938258830350876672_o.jpg?_nc_cat=111&_nc_ht=scontent-arn2-1.xx&oh=fd974c100a59a7874b8fb75bdb7881be&oe=5C8AE7BE)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44542882_1112181052279106_6902166612523089920_o.jpg?_nc_cat=106&_nc_ht=scontent-arn2-1.xx&oh=7b2f2857c80eba412de98509d2083c9e&oe=5C4DEC96)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44425130_1112180545612490_4666941777712775168_o.jpg?_nc_cat=111&_nc_ht=scontent-arn2-1.xx&oh=cee5412daab88a23241ed4f6f835fccd&oe=5C4DCE67)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44475361_1112180775612467_3980424184961433600_o.jpg?_nc_cat=106&_nc_ht=scontent-arn2-1.xx&oh=e0b24fe156b8f250f71bedd809162fbe&oe=5C4B7AC2)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44515362_1112181015612443_7239125441347321856_o.jpg?_nc_cat=110&_nc_ht=scontent-arn2-1.xx&oh=da44b9d6f457a0f4666dddb23c8cf123&oe=5C4497E9)


Rohkem pilte:https://www.facebook.com/pg/VilluScalecrawlers/photos/?tab=album&album_id=1112180418945836 (https://www.facebook.com/pg/VilluScalecrawlers/photos/?tab=album&album_id=1112180418945836)

Title: Re: 3D print 1/10 Jeep Willys
Post by: villu18 on October 22, 2018, 08:59:06 PM

Kaks uut juppi, armatuur ja keskmine osa kerest (22h52min)

Väga hästi laheb asi ikka kokku. ;D

(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44526553_1113010875529457_6524414042587529216_o.jpg?_nc_cat=107&_nc_ht=scontent-arn2-1.xx&oh=5b4c9278b7774fbc2297ddd100a67eb7&oe=5C4E77FC)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44379815_1113011155529429_2776694514323030016_o.jpg?_nc_cat=107&_nc_ht=scontent-arn2-1.xx&oh=3cea1111de0cb95127734abed433b115&oe=5C847A69)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44583349_1113011328862745_4168630648304566272_o.jpg?_nc_cat=110&_nc_ht=scontent-arn2-1.xx&oh=611c2a859b957c189e86e180d90dd275&oe=5C4DBFE6)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44582987_1113011972196014_76768872513929216_o.jpg?_nc_cat=110&_nc_ht=scontent-arn2-1.xx&oh=91cba2d7c044ade5bacb7fc67f2324de&oe=5C8570A1)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44535989_1113012338862644_5590481667589406720_o.jpg?_nc_cat=106&_nc_ht=scontent-arn2-1.xx&oh=a38ed65b6fd4f5865a81041805beb307&oe=5C4CA314)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44522695_1113012272195984_5111633019274264576_o.jpg?_nc_cat=104&_nc_ht=scontent-arn2-1.xx&oh=71bd3c3a07ed8fe3ffced81004965361&oe=5C87D1AC)

Rohkem pilte siin: https://www.facebook.com/pg/VilluScalecrawlers/photos/?tab=album&album_id=1112180418945836 (https://www.facebook.com/pg/VilluScalecrawlers/photos/?tab=album&album_id=1112180418945836)

Title: Re: 3D print 1/10 Jeep Willys
Post by: Daniel on October 24, 2018, 07:43:13 PM

mitu mm Sa korraga prindid või mis kiirusega ?
sest et mul ytleb selle põranda printimiseks ~4h ja saaks kiiremini ka 0.3mm korraga

Title: Re: 3D print 1/10 Jeep Willys
Post by: villu18 on October 26, 2018, 09:27:48 AM

Mai mäleta täpselt minuarust oli 0.15mm kihipaksus ja osa kujukesi olen printinud 0,1mm kihipaksus et kvaliteet hea ja sile jääks.
Aga selliste detailide puhul peaks võibolla katsetama paksemat kihti võibolla tõesti.
Eesimesed prindid läksid untsu kuna slicer program oli uus ja võõras ja säted olid metsas.

Title: Re: 3D print 1/10 Jeep Willys
Post by: villu18 on October 26, 2018, 09:33:12 AM

Vaatasin järgi, printisin jah 0,15 kihipaksusega 22h
 0,3 kihipaksus näitab 11h

Slicer program Cura 3.0.2
Materjal PLA 1.75mm

Title: Re: 3D print 1/10 Jeep Willys
Post by: villu18 on November 21, 2018, 10:16:25 PM

Väike UP.

(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/46831055_1131482553682289_3729086315161976832_o.jpg?_nc_cat=111&_nc_ht=scontent-arn2-1.xx&oh=cc97b068b6943e70f96ddaa05e574bdc&oe=5C74AA1A)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/46690590_1131482787015599_2711186303029870592_o.jpg?_nc_cat=108&_nc_ht=scontent-arn2-1.xx&oh=0d86819cac2a2ba01170b0cf83810381&oe=5C6E2B6F)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/46493063_1131482830348928_6255845081824100352_o.jpg?_nc_cat=104&_nc_ht=scontent-arn2-1.xx&oh=f9034fa580632e84f739a57a39b8cf17&oe=5C7D3B67)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/46634907_1131482880348923_3055255634896224256_o.jpg?_nc_cat=102&_nc_ht=scontent-arn2-1.xx&oh=705fdc5a8722a29c3eb625f1bc82720a&oe=5C71FE29)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/46486305_1131482980348913_7704652814802223104_o.jpg?_nc_cat=101&_nc_ht=scontent-arn2-1.xx&oh=2b1d30599ed3715a48d4659e4c49293c&oe=5C6A0CC4)

Title: Re: 3D print 1/10 Jeep Willys
Post by: villu18 on February 17, 2019, 07:17:06 PM

Minupoolt viimane jupp, juppid nüüd Alari käes ja tema toimetab edasi, eht kuvab ka siia midagi ;)

(https://scontent-arn2-2.xx.fbcdn.net/v/t1.0-9/51818475_1187943684702842_655605158343868416_o.jpg?_nc_cat=108&_nc_ht=scontent-arn2-2.xx&oh=f61c2f02a83184cd32366020791b39a1&oe=5CED7CE9)
(https://scontent-arn2-2.xx.fbcdn.net/v/t1.0-9/51695097_1187943754702835_9161809053670703104_o.jpg?_nc_cat=102&_nc_ht=scontent-arn2-2.xx&oh=cf7d16aa5f2e8ae6f4c9ca8af09b1ff4&oe=5CDF43C5)

Title: Re: 3D print 1/10 Jeep Willys
Post by: Traxxasnoob on March 02, 2019, 07:54:30 PM

Tere Tere
Jõudis see jeep otsaga minukätte.  :)

(http://i65.tinypic.com/30dfe4k.jpg)

olen ta lihtsalt hetkel kokku pannud ja mõelnud mis suunas ja kuidas selle masina ehitamisega võiks jätkata.
vabandan nende ees kes ootavad masina kiiret valmimist..kahjuks peate pettuma. Mina kavatsen selle masinaga rahulikult kulgeda ja vaadata kuhu välja jõuame  :)

(http://i64.tinypic.com/34zg6jc.jpg)

Ei tea hetkel kas masin tuleb 2wd või 4wd. kuid enam ja enam kui teda vaatan oma aknalaual siis tundub et suunaks saab on-road masin.

(http://i66.tinypic.com/10r0or8.jpg)

(http://i66.tinypic.com/28hdaon.jpg)

Eks vaatame mis aeg toob  :) :)

Title: Re: 3D print 1/10 Jeep Willys
Post by: Daniel on March 03, 2019, 09:42:04 AM

inspiratsiooni:  ;)
(https://i.pinimg.com/originals/23/0c/60/230c606f3f66ee837998edbeebad798f.jpg)