crawl.ee
Üldine vestlus => Yldine crawlimise jutt => Topic started by: Daniel on July 08, 2007, 10:50:07 PM
-
http://www.teamnovak.com/products/esc/1841rooster_crawler/index.html
(http://www.teamnovak.com/password/nov_pic/sec_page/thumbnails/1841_rooster_crawler150px.jpg)
specifically designed crawling driving profiles which feature Zero Reverse Delay, and high-powered Drag Brakes (or “Hill” or “Hold” brakes)
Water-Resistant Case
Heavy-Duty 6 Volt / 5 Amp BEC
ma ei oska enam midagi lisada :-X
ja siis veel selline asi
http://www.teamnovak.com/products/brushless/3019crawler_sintered_system/index.html
(http://www.teamnovak.com/password/nov_pic/sec_page/thumbnails/3019_crawler_system150px.jpg)
-
väga äge!
-
väga äge!
Ja lisaks sellele ainult 92.99$
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXSFR0&P=ML
ja brushless: 209.99$
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXSFR1&P=ML
( seda viimast soovitaks vast Indreku twinile ;) )
-
heh. siis on isegi odavam, kui superkukk omal ajal.. väga abiks.
indrekule soovitaks pigem suuremat spurri, väiksemaid pinjoone ja mitu lathe tüüpi mootorit. mingi 55/65 peaks kärama kyll.
-
hrz
-
Järgmine uuendus Novakilt - nyyd ka brushed mootor !
http://www.teamnovak.com/products/esc/55_turn_rooster_combo/index.html
ehk siis integy lathe mootorile on alternatiiviks nyyd ka novak
Number of Turns: 55
Design: Stand-up Brushed
Input Voltage: 4-7 cells (1.2V/cell) or 2S Li-Poly cells
Motor Size: 2.07" x 1.42" (52.7 x 36.1 mm)
Shaft Diameter: 0.125" (3.2 mm) [accepts all existing pinion gears]
Bearing: Standard 3/8" x 1/8"
Motor Weight: 6.03 oz. (171 grams)
Magnet: High-Strengh Ferrite
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTJD7&P=7 25.-$