crawl.ee

Üldine vestlus => Yldine crawlimise jutt => Topic started by: villu18 on October 12, 2018, 09:01:51 PM

Title: 3D printer
Post by: villu18 on October 12, 2018, 09:01:51 PM
JaJaJa küll ma lõppuks ühe crawleri ka prindin ;)

Sain siis endale kaua unistatud 3D printeri, Creality Ender-3
Paar pilti ja muide just on esimene test print käsil.

Nüüd saab mudeliehituse kordades lihtsamaks, kui osa juppe saan printida 8)

(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/43669696_1106609286169616_7788104484630036480_n.jpg?_nc_cat=105&oh=d684a272c3164745f4d3d1f3f4f2f5ce&oe=5C45B812)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/43676259_1106647886165756_2678579744542294016_n.jpg?_nc_cat=105&oh=42de227718c26a41a700be3f32bd97ff&oe=5C530547)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/43636071_1106647822832429_5485841450916642816_n.jpg?_nc_cat=105&oh=5c734893bb550b8c2eb4eb52fc039864&oe=5C42D4C5)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/43880492_1107088216121723_5244561788934029312_n.jpg?_nc_cat=110&oh=37f05b8d59bd00fca632838971d2ef9e&oe=5C15B286)
Title: Re: 3D printer
Post by: Daniel on October 13, 2018, 08:58:53 AM
Väga mõistlik otsus !
( Võta nyyd supler ja kysi Antixilt korra crawlerit laenuks .... Ja siis saada joonised mulle ka  ;D )
Title: Re: 3D printer
Post by: villu18 on October 21, 2018, 12:33:29 PM
Jap, Antixi masina pildistasin viimasel võistlusel ülesse, vaja on ainult paari mõõtu ja joonist, siis saab raami välja printida ;)

Mõned jubinad mida olen esimesel nädalal printinud, et masinat testida.

Test koer 5tundi ja 31minutit.
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/43788619_1107466259417252_5472566003357450240_o.jpg?_nc_cat=110&_nc_ht=scontent-arn2-1.xx&oh=dce59f738652ab370a0ab2340b230e95&oe=5C593C63)
LOTR sõrmus kaus, diameeter 10cm 
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44602249_1112179162279295_5124386817285554176_o.jpg?_nc_cat=111&_nc_ht=scontent-arn2-1.xx&oh=98575a48e1b6992ad3c612db71ac6a0a&oe=5C3C65F6)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44420968_1112179388945939_5534698224327065600_o.jpg?_nc_cat=102&_nc_ht=scontent-arn2-1.xx&oh=143668ab9676f557b3c4c93e4ac5a6d3&oe=5C50F74C)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44447373_1112179582279253_5621412033485340672_o.jpg?_nc_cat=105&_nc_ht=scontent-arn2-1.xx&oh=0fdfab1292da9220349cb3adbb67d2c5&oe=5C3F18B9)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44378467_1112179245612620_7050501640327004160_o.jpg?_nc_cat=105&_nc_ht=scontent-arn2-1.xx&oh=d818d19223638fdaa7b211a45e3f5ace&oe=5C88A0C7)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44505666_1112179678945910_4639421487000846336_o.jpg?_nc_cat=101&_nc_ht=scontent-arn2-1.xx&oh=cb9f6f20c2f26d905b6eff91f68acf64&oe=5C3CBB36)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/44452536_1112179708945907_4872189258242195456_o.jpg?_nc_cat=103&_nc_ht=scontent-arn2-1.xx&oh=b6bd1565b350038e9fdae4b5a1b26c34&oe=5C4D9E3C)

Title: Re: 3D printer
Post by: villu18 on December 29, 2018, 06:48:19 PM
Hulgi asju ja jubinaid olen kahe kuuga printinud, veel mõned näited:
Suuremosa netiavarustest saadud disainid aga vaikselt hakkab ka endaomi tulema 8)

(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/49319501_1158676200962924_2261620758918725632_o.jpg?_nc_cat=106&_nc_ht=scontent-arn2-1.xx&oh=fde205797701c22020a2f07bb1efa099&oe=5C9DFF90)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/46502261_1131483740348837_4462029218733096960_o.jpg?_nc_cat=103&_nc_ht=scontent-arn2-1.xx&oh=d8522be7fae09aec428017828746d107&oe=5CD3136C)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/48921823_1158676694296208_4149979048447049728_o.jpg?_nc_cat=107&_nc_ht=scontent-arn2-1.xx&oh=71efb9559c49701855986170ab843ae3&oe=5C944480)
1/10 scalas kajak
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/48964996_1158676840962860_7582881957860605952_o.jpg?_nc_cat=103&_nc_ht=scontent-arn2-1.xx&oh=39016c048eb01913a579040be9fef60b&oe=5CD0679B)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/48928873_1158676760962868_3172131118178631680_o.jpg?_nc_cat=104&_nc_ht=scontent-arn2-1.xx&oh=a06ecc35d4daf3b094089e09a1fae3cf&oe=5C9EEC5B)
1.9 veljed
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/49151087_1158676880962856_317258251924144128_o.jpg?_nc_cat=107&_nc_ht=scontent-arn2-1.xx&oh=e51efea10218e42cde3b06167aa798bb&oe=5C990E20)
Minu disain, Urali õhufilter
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/49065935_1158676447629566_4408950488175738880_o.jpg?_nc_cat=110&_nc_ht=scontent-arn2-1.xx&oh=a2587c0189b4e94214237ee645d83780&oe=5CCE00BD)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/49376345_1158676550962889_2019872206766473216_o.jpg?_nc_cat=102&_nc_ht=scontent-arn2-1.xx&oh=6e7b0c2326ae3f4e9c1dda236b3c01e4&oe=5CD6CD58)
Uraal sai ka uue vahekasti korpuse, tänud veelkord Danile eelmise eest.
Title: Re: 3D printer
Post by: Daniel on December 30, 2018, 12:47:03 AM
Uraal sai ka uue vahekasti korpuse, tänud veelkord Danile eelmise eest.

No problemo ;)
printer on seadistatud juba kiiremaks ?
Title: Re: 3D printer
Post by: villu18 on December 31, 2018, 10:10:12 AM

printer on seadistatud juba kiiremaks ?
[/quote]

Natukene mitte palju, ajan peent kvaliteeti taga :P

(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/49203383_1159447824219095_249318681119555584_n.jpg?_nc_cat=101&_nc_ht=scontent-arn2-1.xx&oh=15e64e9d4b9c8627e571c1d20d9c46bc&oe=5C9B1D16)
(https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/48991529_1159447917552419_3526799956885110784_n.jpg?_nc_cat=102&_nc_ht=scontent-arn2-1.xx&oh=37d3332a3b2dd279f9560c2e53fc3c02&oe=5CCC791D)