Author Topic: UUS Novak Rooster Crawler ESC  (Read 5352 times)

Daniel

  • Administrator
  • crawl team
  • *****
  • Posts: 537
    • View Profile
UUS Novak Rooster Crawler ESC
« on: July 08, 2007, 10:50:07 PM »
http://www.teamnovak.com/products/esc/1841rooster_crawler/index.html



specifically designed crawling driving profiles which feature Zero Reverse Delay, and high-powered Drag Brakes (or “Hill” or “Hold” brakes)
Water-Resistant Case
Heavy-Duty 6 Volt / 5 Amp BEC

ma ei oska enam midagi lisada  :-X

ja siis veel selline asi
http://www.teamnovak.com/products/brushless/3019crawler_sintered_system/index.html

hrz

  • crawl team
  • *
  • Posts: 19
  • I crawl
    • View Profile
Re: UUS Novak Rooster Crawler ESC
« Reply #1 on: July 10, 2007, 06:40:52 PM »
väga äge!

Daniel

  • Administrator
  • crawl team
  • *****
  • Posts: 537
    • View Profile
Re: UUS Novak Rooster Crawler ESC
« Reply #2 on: July 10, 2007, 07:00:14 PM »
Quote
väga äge!
Ja lisaks sellele ainult 92.99$
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXSFR0&P=ML
ja brushless: 209.99$
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXSFR1&P=ML
( seda viimast soovitaks vast Indreku twinile ;) )

hrz

  • crawl team
  • *
  • Posts: 19
  • I crawl
    • View Profile
Re: UUS Novak Rooster Crawler ESC
« Reply #3 on: July 10, 2007, 08:11:47 PM »
heh. siis on isegi odavam, kui superkukk omal ajal.. väga abiks.

indrekule soovitaks pigem suuremat spurri, väiksemaid pinjoone ja mitu lathe tüüpi mootorit. mingi 55/65 peaks kärama kyll.

-
hrz


Daniel

  • Administrator
  • crawl team
  • *****
  • Posts: 537
    • View Profile
Re: UUS Novak Rooster Crawler ESC
« Reply #4 on: October 22, 2007, 11:41:47 AM »
Järgmine uuendus Novakilt - nyyd ka brushed mootor !

http://www.teamnovak.com/products/esc/55_turn_rooster_combo/index.html

ehk siis integy lathe mootorile on alternatiiviks nyyd ka novak
       
Number of Turns:  55
Design:  Stand-up Brushed
Input Voltage:  4-7 cells (1.2V/cell) or 2S Li-Poly cells
Motor Size:  2.07" x 1.42" (52.7 x 36.1 mm)
Shaft Diameter:  0.125" (3.2 mm) [accepts all existing pinion gears]
Bearing:  Standard 3/8" x 1/8"
Motor Weight:  6.03 oz. (171 grams)
Magnet:  High-Strengh Ferrite

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTJD7&P=7  25.-$